Acuerdo sobre datos técnicos militares críticos

Información útil:
Guía del aparejador sobre técnicas adecuadas de estampado

Locoloc® #3-K Kit de ensanchador hidráulico

hydraulic swager kit

Locoloc® #3-K Kit de ensanchador hidráulico

Locoloc® Hydraulic Handswager Kit
Part No. #3-K

Exerts 14 tons pressure. A few strokes of handle brings the dies from wide open to contact with the fitting to be swaged. Then an internal valve automatically shifts from the low pressure pump stage to the high pressure compression stage. A relief valve prevents over-compression.

The advanced-retract control for the ram is located in the moveable handle. It is operated by twisting the handle less than a 1/4 turn.

Full visibility of the working area is afforded by the narrow, 180 degree swivel “C” head, making it easy to position the dies on the fitting. Gauge supplied with each die.

Descargar una copia del manual del operador.

Vea nuestro CÓMO: Hydraulic Swager Tool


Our Locoloc® Swaging tools are domestically manufactured at our Naples, Florida facility. By purchasing swaging tools from Loos & Co., Inc., you are guaranteed a well-crafted American made product, while directly supporting American jobs and the American manufacturing industry. If you would like to learn more about using a swaging tool, check out our swaging tool instructions videos.

Si desea hablar con uno de nuestros expertos en estampación sobre el uso de una herramienta de estampación u obtener más información sobre nuestros productos de fabricación nacional, póngase en contacto con nosotros a través de uno de los métodos que se indican a continuación y nos pondremos en contacto con usted directamente.


Very rugged, yet portable, this hydraulic hand swaging press with interchangeable dies is for compressing aluminum or copper oval sleeves on 1/4″, 9/32″, 5/16″, 3/8″, 7/16″ and 1/2″ diameter cable and wire rope, plus aluminum or copper stop sleeves on 1/4″, 9/32″, 5/16″, and 3/8” diameter cable and wire rope.


Kit Contains:

1 #3-H Hydraulic Handswager Tool

6 Sets of Dies

6 Sets of Gauges

1 Carrying Case



Information below for: Flexible Cable 7×19 / 6×19 Construction.

For Maximum Safety and Holding Power we recommend using Two (2) sleeves on 3/8″ and larger.


Su espátula LOCOLOC® ha sido diseñada para proporcionarle años de servicio sin problemas. Para obtener el mejor rendimiento, le recomendamos:

  1. Keep the tool clean and free from dirt or metal particles, especially around the head, dies, and ram of the tool.
  2. Lubricate all moving parts regularly.
  3. Keep all bolts tight.
  4. Check the oil level periodically and use clean oil as recommended. Never mix different brands or types of oil.
es_MXEspañol de México