1-800-321-LOOS (5667)  | La région est en train de se développer : (239) 643-5667

Accord sur les données techniques critiques militaires

Informations utiles :
Guide du gréeur sur les techniques de rétreint appropriées

Locoloc® #1-SC Mains courantes

Locoloc Handswager

Locoloc® #1-SC Mains courantes

Locoloc® Handswager
Part No. #1-SC

Eye, lap, and stop sleeve splicing of cables is made sure and easy with the new handswagers. Design features “over-center” leverage, which transmits a powerful snap-action to the final thrust of the jaws… assuring a tight, clean compression every time. Easy adjustment. Individual replacement parts are available. Parts list included with tool. Gauge included with each tool.

This tool is for Copper and Aluminum only. For Stainless Steel Sleeves use “0” tool.

Télécharger a copy of our general swaging instructions.

Consultez notre guide pratique : Multi-cavity Handswaging Tool

FABRIQUÉ AUX ÉTATS-UNIS : OUI

Our Locoloc® Hand Swaging tools are domestically manufactured at our Naples, Florida facility. By purchasing hand swaging tools from Loos & Co., Inc., you are guaranteed a well-crafted American made product, while directly supporting American jobs and the American manufacturing industry. If you would like to learn more about using a swaging tool, check out our swaging tool instructions videos.

If you would like to speak with one of our swaging experts about using a swaging tool or learn more about our domestically made products, please contact us via one of the methods below, and we will reach out to you directly.

Spécifications

Multi-compression hand swager with cable cutter. Swages 1/16″, 3/32″, 1/ 8 “, 5/32″, and 3/16″ oval and stop sleeves, plus 7/32″ stop sleeves, total of 11 sizes plus the ability to cut up to 7/32″ diameter aircraft quality steel cable. A tool with a dozen functions!

Length: 26”

Weight: 6.5 lbs.

Compressions

Maintenance

Your LOCOLOC® Swager has been designed to give you years of trouble-free service. To obtain the best performance, we recommend:

  1. nettoyer et lubrifier régulièrement toutes les pièces mobiles
  2. maintenir tous les boulons serrés
  3. maintenir l'ajustement de l'écraseur

Pièces détachées

Swaging Head SOLD AS ASSEMBLY ONLY

300-1A Jaw Head Assembly includes:

  • 300-1 Swaging Jaw Set (1)
  • 302-0 Back Plate (1)
  • 303-1 Front Plate (1)
  • 304-1 Fulcrum Pin (1)
  • 305-1 Jaw Bolt (2)
  • 306-1 Plate Bolt (1)
  • 307-1 Nut for Jaw Bolt (2)
  • 308-1 Nut for Plate Bolt (1)

 

301-R-1A Right Handle (sold as an assembly only) includes:

  • 301-R Handle (1)
  • 309-1 Connecting Pin (1)
  • 310-1 Adjusting Arm (1)
  • 311-1 Adjusting Screw (1)
  • 312-1 Washer (1)
  • 313-1 Nylon Bushing (1)
fr_FRFrançais