1-800-321-LOOS (5667)  | La région est en train de se développer : (239) 643-5667

Accord sur les données techniques critiques militaires

Informations utiles :
Guide du gréeur sur les techniques de rétreint appropriées

Locoloc® #3-K Kit de serrage hydraulique

hydraulic swager kit

Locoloc® #3-K Kit de serrage hydraulique

Locoloc® Hydraulic Handswager Kit
Part No. #3-K

Exerts 14 tons pressure. A few strokes of handle brings the dies from wide open to contact with the fitting to be swaged. Then an internal valve automatically shifts from the low pressure pump stage to the high pressure compression stage. A relief valve prevents over-compression.

The advanced-retract control for the ram is located in the moveable handle. It is operated by twisting the handle less than a 1/4 turn.

Full visibility of the working area is afforded by the narrow, 180 degree swivel “C” head, making it easy to position the dies on the fitting. Gauge supplied with each die.

Télécharger une copie du manuel de l'opérateur.

Consultez notre guide pratique : Hydraulic Swager Tool


Our Locoloc® Swaging tools are domestically manufactured at our Naples, Florida facility. By purchasing swaging tools from Loos & Co., Inc., you are guaranteed a well-crafted American made product, while directly supporting American jobs and the American manufacturing industry. If you would like to learn more about using a swaging tool, check out our swaging tool instructions videos.

Si vous souhaitez vous entretenir avec l'un de nos experts en rétreint sur l'utilisation d'un outil de rétreint ou en savoir plus sur nos produits fabriqués localement, veuillez nous contacter par l'une des méthodes ci-dessous, et nous vous répondrons directement.


Very rugged, yet portable, this hydraulic hand swaging press with interchangeable dies is for compressing aluminum or copper oval sleeves on 1/4″, 9/32″, 5/16″, 3/8″, 7/16″ and 1/2″ diameter cable and wire rope, plus aluminum or copper stop sleeves on 1/4″, 9/32″, 5/16″, and 3/8” diameter cable and wire rope.


Kit Contains:

1 #3-H Hydraulic Handswager Tool

6 Sets of Dies

6 Sets of Gauges

1 valise de transport



Information below for: Flexible Cable 7×19 / 6×19 Construction.

For Maximum Safety and Holding Power we recommend using Two (2) sleeves on 3/8″ and larger.


Votre pince à sertir LOCOLOC® a été conçue pour vous offrir des années de service sans problème. Pour obtenir les meilleures performances, nous recommandons

  1. Keep the tool clean and free from dirt or metal particles, especially around the head, dies, and ram of the tool.
  2. Lubricate all moving parts regularly.
  3. Keep all bolts tight.
  4. Check the oil level periodically and use clean oil as recommended. Never mix different brands or types of oil.