Eye, lap, and stop sleeve splicing of cables up to 3/16″ diameter are made sure and easy with the new handswagers. Design features “over-center” leverage, which transmits a powerful snap-action to the final thrust of the jaws… assures a tight, clean compression every time. Easy adjustment. Individual replacement parts are available. Parts list included with tool. Gauge included with each tool.
For the shop requiring a production tool the #1-P Pneumatic Swager eliminates hand labor and automates swaging of Locoloc® oval and stop sleeves. This tools is for Copper and Aluminum only. For Stainless Steel Sleeves use “0” Tool.
Herunterladen a copy of the operator’s manual.
HERGESTELLT IN DEN USA: JA
Utilizing the jaws of the #1-BSC Bench Swager the #1-P Pneumatic Swager will swage all 1/16″, 3/32″, 1/8″, 5/32″, and 3/16″ oval and stop sleeves plus 7/32″ stop sleeves. (11 sizes in all!)
Foot switch operation allows free movement of hands and quick disconnect to your air supply. Operates on
standard air supply. (140 psi, minimum.)
Länge: 20″.
Height: 11″
Weight: 27.5 lbs.
| Part# | Beschreibung | Qty. |
|---|---|---|
| #1P-1 | Coupling, 3/16" ID X 1/8" MPT, #220B | 4 |
| #1P-3 | Elbow, Street, Coupling, 1165A | 2 |
| #1P-6 | Foot Switch | 1 |
| #1P-7 | Hose, 3/16", Low Pressure, 60" | 2 |
| #1P-8 | Nipple, 2", Dynaquip 117A2 | 1 |
| #1P-9 | Nut, 3/8-24, UNRF Locking | 4 |
| #1P-10 | Screw, 3/8-24, UNRF 1 3/8", Hex Head | 4 |
| #1P-11 | Clamp 7/16", O, Oetaker, 2 Prong | 4 |
| PI5-2 | Cotter Pin, SS, 3/32" Dia, 1 Inch | 1 |
| PI1-8 | Pin Clevis for 1/4" MS Parts 3/8" Dia | 1 |
| #1P-50 | Jaw Assembly, for #1-P, Machine Head | 1 |
| #1P-21 | Nut, 5/8-18, Hex, Locking, Grade 8 | 3 |
| 84-38 | Plate Name | 1 |
| 74-21 | Screw, No. 4 X 3/16" LG, Drive, SS | 2 |
| #1P-29 | Wheel, Adjustment | 1 |
| #1P-31 | Cylinder, Air, Fabco | 1 |
| #1P-32R | Base, 2 Part, R.H. Side (Includes (1) 130-1) | 1 |
| #1P-32L | Base, 2 Part, L,H. Side (Includes (1) 130-1) | 1 |
| #1P-33 | Connector, 1/2-20 Threaded Yoke Rod (Includes #1P-22) | 1 |
| #1P-34 | Link, Upper (Includes (2) 130-1 Old Style) | 2 |
| #1P-35 | Link, Lower (enthält (3) 130-1 Old Style) | 1 |
| #1P-36 | Rahmen, Erweiterung | 1 |
| #1P-37 | Schutz, 1/2", #16 Flach, 7" X 23" LWO, EXP Metall | 1 |
| #1P-38 | Schraube, 7/16-14 X 3/8", langer Satz | 2 |
| #1P-39 | Schraube, 3/8" X 1", Sockelschulter | 3 |
| #1P-41 | Schraube, 1/4-20 X 3/8", Innensechskantschraube | 4 |
| #1P-42 | Unterlegscheibe, 1/4", Standard, Stahl | 4 |
| #1P-43 | Stecker, 1/8 N.P.T. #726 Milton | 1 |
| #1P-44 | Kupplung, 1/8 N.P.T. | 1 |
| #4-9HS | Schutz, Fußschalter, 522B14 | 1 |
| GA-1P | Messgerät | 1 |
| 84E-19 | Stellschraube, 1/4-20 X 1/4" Innensechskant | 2 |
| 74-46 | Unterlegscheibe, Abstandshalter | 2 |
| 130-1 | Buchse (9- Alter Stil /2- Neuer Stil Maschine) | 9 |
| 3/8LW | Unterlegscheibe, 3/8" Schloss | 3 |
Ihr LOCOLOC® Swager wurde so konzipiert, dass Sie jahrelang problemlos arbeiten können. Um die bestmögliche Leistung zu erzielen, empfehlen wir:
Um eine ordnungsgemäße Verformung von Locoloc® Aluminium- und Kupferhülsen enthalten wir eine Locoloc® "Gut" "Nicht gut" Messgerät mit jedem Kabelverpressungswerkzeug kostenlos.
Sehen Sie sich unser HOW TO: #1P Luftbetriebene Stauchmaschine
Deutsch 
English 
Français 
Español de México 
Nederlands 
简体中文 
Italiano