Spezifikationen
Output: 8 Ton
Weight: 11 lbs.
Size: 13.2” L x 14.7” H x 3.3” W
Jaw Opening: .95″
Ersatzklinge P/N: 24-08
1-800-321-LOOS (5667) | Lokal: (239) 643-5667
This tool was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaws, acetylene torches, and cable cutters.
Unser battery-powered cable cutters are designed to cleanly cut through the toughest steel cable on the market. Not only do they have the capability to replace manual cable cutters, but they can also replace entire tool kits, including bolt cutters and hacksaws.
With a pull of a trigger, you can cut wire rope up to 7/8″, standard guy wires to 5/8″, and rebar to 1/2″. The specially designed flip-top latch and rotating head provide exceptional ease of use and maneuverability in tight working quarters. The HC-S724H has an overload bypass that will “kick-out” when the tool reaches 8 tons or is attempting to cut cables beyond its capacities.
Herunterladen a copy of the operator’s manual for the cable cutter.
Output: 8 Ton
Weight: 11 lbs.
Size: 13.2” L x 14.7” H x 3.3” W
Jaw Opening: .95″
Ersatzklinge P/N: 24-08
Wire Rope: 7/8” (22 mm)
Rebar (Sc 40): 5/8” (16 mm)
Rebar (Sc 60): 1/2” (12 mm)
Ground Rod: 5/8” (16 mm)
ACSR: 477 MCM
Guy Wire: 5/8” (16 mm)
EHS Guy Wire: 7/16” (11 mm)
Soft Steel Bolts: 1/2” (12 mm)
Kette: NICHT SCHNEIDEN
Due to material composition, the ratings are to be used as a guide. Actual capacity may vary due to “bypass” feature.
STANDARD ACCESSORIES INCLUDED:
Deutsch 
English 
Français 
Español de México 
Nederlands 
简体中文 
Italiano