1-800-321-LOOS (5667) | Local: (239) 643-5667
How are we doing? Take our survey!
Locoloc® Hydraulic Handswager Kit
Part No. #3-K
LOCOLOC® #3-K HYDRAULIC HANDSWAGER KIT
Exerts 14 tons pressure. A few strokes of handle brings the dies from wide open to contact with the fitting to be swaged. Then an internal valve automatically shifts from the low pressure pump stage to the high pressure compression stage. A relief valve prevents over-compression.
The advanced-retract control for the ram is located in the moveable handle. It is operated by twisting the handle less than a 1/4 turn.
Full visibility of the working area is afforded by the narrow, 180 degree swivel "C" head, making it easy to position the dies on the fitting. Gauge supplied with each die..
Click HERE to download/print a copy of the operator's manual.
MADE IN THE USA: YES
Very rugged, yet portable, this hydraulic hand swaging press with interchangeable dies is for compressing aluminum or copper oval sleeves on 1/4", 9/32", 5/16", 3/8", 7/16" and 1/2" diameter cable and wire rope, plus aluminum or copper stop sleeves on 1/4", 9/32" , 5/16" and 3/8” diameter cable and wire rope.
Kit Contains:
1 #3-H Hydraulic Handswager Tool
6 Sets of Dies
6 Sets of Gauges
1 Carrying Case
ALWAYS USE GAUGE TO CHECK THE AFTER-SWAGE DIMENSION
Information below for: Flexible Cable 7x19 / 6x19 Construction.
.jpg)
For Maximum Safety and Holding Power we recommend using Two (2) sleeves on 3/8" and larger.
To obtain the best possible performance we recommend:
(1) Keep the tool clean and free from dirt or metal particles, especially around the head, dies and ram of the tool.
(2) Lubricate all moving parts regularly
(3) Keep all bolts tight
(4) Check the oil level periodically and use clean oil as recommended. Never mix different brands or types of oil.
